REGAFFAIRS AI
Guide · 2026-11-07 · 4 min

Cosmetic manufacturing license in India and how to apply

Apply for a cosmetic manufacturing license through India's State Licensing Authority. Check COS forms, dossier requirements and the statutory fee baseline.

In India, a cosmetic manufacturing license comes from the State Licensing Authority responsible for the manufacturing premises. CDSCO handles the separate central route for imported cosmetics, not domestic manufacturing licences. CDSCO explains this division of responsibility.

Start with the state where the factory is located. Ask for its current cosmetics checklist, submission channel and fee calculation before preparing the application. The principal Cosmetics Rules, 2020 set out the forms below. Check later amendments before filing: CDSCO lists a July 2025 amendment to the Rules.

Which cosmetic licence do you need?

The principal Cosmetics Rules distinguish the following routes:

RouteApplication formLicence or registration formAuthority
Own manufactureCOS-5COS-8State Licensing Authority
Loan licenceCOS-6COS-9State Licensing Authority
Import registrationCOS-1COS-2Central Licensing Authority/CDSCO

For example, Goa's official cosmetics forms page lists COS-5, COS-6 and COS-7. Use the relevant state's instructions rather than assuming every application goes through one national portal.

If you plan to outsource production, confirm the route for your proposed arrangement with the state authority. Don't assume that a private-label agreement automatically removes the need to consider a loan licence. Import registration does not replace a manufacturing licence.

How to apply for a cosmetic manufacturing license

Confirm the premises and product scope

Prepare the list of cosmetics you intend to manufacture and identify the premises covered by the application. The principal Rules require separate applications and licences for separate premises. Match your preparation to the site concerned, rather than treating one licence as company-wide permission. See Chapter IV of the Rules.

For products with novel ingredients, check whether the separate central "new cosmetic" permission route applies. COS-12 is the application and COS-3 is the permission. A new brand alone does not make a product a "new cosmetic". The principal Rules address this distinction.

Prepare the operating arrangements

Prepare the premises and equipment before completing the application documents. The principal Rules require competent whole-time technical supervision and testing arrangements. The Seventh Schedule sets requirements for premises, plant and equipment. Confirm the detailed requirements for your operation with the state authority. See Rules 23 and 26 and the Seventh Schedule.

Assemble the supporting documents

Use these preparation headings from the principal Rules, then reconcile them with the state's current checklist:

  • Fee receipt.
  • Manufacturing-area layout and proof of lawful possession of the premises.
  • Firm-constitution documents.
  • Machinery and equipment list.
  • Technical staff details, qualifications and employment documents.
  • Cosmetics list, composition formulae and labels.
  • COS-7 self-certification of compliance with good manufacturing practices and Seventh Schedule requirements.
  • Signed undertakings and brand or trademark documents, where applicable.

The source is Part II of the Second Schedule and Rules 23 and 26. This is a preparation list, not an exhaustive current checklist for every state.

Submit through the state's current channel

Confirm whether your application is COS-5 or COS-6, then follow the State Licensing Authority's filing instructions. Keep the application form, premises details, product list and fee calculation consistent. Ask the authority about outstanding requirements before setting a production start date. Don't plan around a guaranteed approval period.

What does a cosmetic manufacturing license cost?

The fee scale in the principal 2020 Rules is ₹10,000 for a COS-8 grant covering up to ten items of a category. It specifies ₹500 for each additional item in that category, and ₹10,000 for ten items of each additional category. The principal text gives the same grant-fee scale for a COS-9 loan licence. See Third Schedule, item 2.

These figures are a statutory baseline, not a current fee quotation. Confirm the payable amount and product grouping with your State Licensing Authority. ₹10,000 is not a flat fee for an unlimited product list.

Budget separately for premises, equipment, staff, testing and any professional assistance. Those costs are not included in the government licence fee. State fee resources, such as Goa's official fee page, can help you locate the applicable fee information.

Keeping the licence compliant

The principal Rules use a retention model: manufacturing licences continue in perpetuity, subject to retention fees for each five-year period, unless suspended or cancelled. Confirm the current retention procedure with the state. Don't treat five years as automatic expiry, or perpetual validity as freedom from ongoing obligations. See Rule 30.

The manufacturing license number is also a label requirement under the principal Rules. Include it in your label review alongside the other applicable requirements. See Rule 34.

A licence does not remove product obligations. CDSCO states that applicable quality and safety standards include those in the Ninth Schedule. It also identifies the prohibition on false or misleading cosmetic claims. Check CDSCO's cosmetics guidance.

How cosmetic import registration differs

If you import finished cosmetics, follow the central registration route rather than applying for a state manufacturing licence for that activity. CDSCO states that registration covers cosmetics with their pack sizes, variants and manufacturing premises before import. Its official page explains the import requirement.

RegAffairs AI's answer on cosmetic manufacturing licences in India covers the manufacturing and import routes with source citations.

Related guides