Dermal absorption in cosmetic safety assessments explained
Dermal absorption is a chemical's passage through skin into the body. Learn how it is tested and when the SCCS uses its 50% default in cosmetic assessment.
Dermal absorption is the passage of a chemical through the skin into the body, also called percutaneous absorption. Cosmetic safety assessors use it to estimate systemic exposure from an ingredient applied to skin. NIOSH defines the term; the SCCS Notes of Guidance set out its assessment approach.
When measured data are absent or inadequate, the SCCS uses a conservative 50% dermal-absorption default. This does not mean that skin absorbs half of every chemical or cosmetic product. It is an assessment assumption, not a measured biological average. The framework below concerns EU cosmetic safety assessment, not a universal UK or US legal default.
Dermal exposure versus dermal absorption
Dermal exposure means contact with skin. Absorption concerns passage into the body. Contact alone therefore cannot tell an assessor how much of an ingredient becomes systemically available. NIOSH discusses absorption separately from the effects of skin contact.
Skin penetration should not be treated as proof of systemic uptake. Nor does an absorption percentage establish whether an ingredient causes irritation or other dermal toxicity. Keep the exposure estimate separate from the assessment of harmful effects. For cosmetic assessment, the SCCS specifies which measured skin compartments count towards the absorbed amount.
How dermal absorption is measured
OECD Test Guideline 428 describes an in vitro diffusion-cell method. It uses skin in static or flow-through cells and measures the chemical in receptor fluid. The test also examines its distribution across the system and its time profile, normally over 24 hours.
Application should reflect human exposure. The OECD method calls for realistic concentrations in typical formulations. An absorption result is therefore not a fixed property that can be transferred to every product containing that ingredient.
For cosmetics, the SCCS combines OECD TG 428 with its Basic Criteria. Human skin is preferred, with pig skin as an alternative. Skin integrity, the vehicle and contact time matter. Check whether the study formulation and exposure conditions support the proposed use before taking its percentage into a safety calculation.
The SCCS absorbed amount generally includes the dermis, viable epidermis excluding the stratum corneum, and receptor fluid. Counting receptor fluid alone misses part of that amount. Counting everything left on or in the skin also misstates the assessment.
Which dermal absorption default does the SCCS use?
The 12th revision, SCCS/1647/22, was adopted in May 2023, with two later corrigenda that year. Its 50% default applies when measured dermal-absorption data are missing or inadequate. Having a study does not automatically avoid the default: its quality and suitability still need assessment.
For studies meeting the Basic Criteria, the SCCS uses the mean plus one standard deviation. Greater deviations or variability can warrant the mean plus two standard deviations, or rejection and use of the default. The study interpretation rules therefore affect the value entered into the exposure calculation. Reporting only the experimental mean can leave out that adjustment. Check the basis for the selected value before reusing a study result.
Competing percentages need context. Commission Decision 2013/674/EU, Annex section 3.8.3(a), allows consideration of 10% when molecular weight exceeds 500 Da and either log Pow is below −1 or above 4. Both the molecular-weight condition and one log Pow condition must hold. These properties do not prove zero absorption.
The same Decision gives a 100% worst-case fallback when no measurements, scientifically valid in silico rate or default absorption rate can be used. That is narrower than an unconditional no-data rule. For an SCCS assessment without adequate measured data, use the 12th revision's 50% default described above.
Using the result in a safety assessment
Ingredient concentration belongs in the calculation. Applying an absorption percentage directly to total product exposure would omit that step. The SCCS percentage approach is:
SED = E_product × (C / 100) × (DAp / 100)
Here, E_product is daily product exposure in mg product/kg body weight/day. C is ingredient concentration in percent, and DAp is dermal absorption in percent. The result is systemic exposure dose, expressed in mg ingredient/kg body weight/day. Do not divide by body weight again or repeat frequency and retention factors already included in the exposure input. These SCCS equations require consistent inputs.
RegAffairs AI's answer on dermal absorption links the assessment method and defaults to the cited regulatory documents.