Didecyldimethylammonium chloride uses and GB biocide rules
Didecyldimethylammonium chloride (DDAC) is a biocidal active substance. Check its identity, GB and EU product-type approvals, hazards and product SDS.
Didecyldimethylammonium chloride, or DDAC, is a quaternary ammonium biocidal active substance: CAS 7173-51-5, EC 230-525-2. Great Britain confirms wood-preservative approval, while EU approval acts also cover specified disinfectant uses.
The EU annex names it N,N-didecyl-N,N-dimethylammonium chloride. Active-substance approval does not authorise every formulation containing DDAC. Check the market, product type and approval conditions for the intended use.
DDAC biocide status in Great Britain and the EU
The comparison below uses HSE records and EU approval acts available for this lookup on 7 November 2026. GB means England, Scotland and Wales. Northern Ireland follows the EU Biocidal Products Regulation (BPR) route, so do not apply a GB status across the whole UK. HSE's active-substance list separates GB and EU/NI entries.
| Product type | Great Britain | Dates set by EU approval acts |
|---|---|---|
| PT1 human hygiene; PT2 disinfectants and algaecides not for direct application to humans or animals | Under review in HSE records | Approved from 1 February 2024 to 31 January 2034 |
| PT3 veterinary hygiene; PT4 food and feed area | Under review in HSE records | Approved from 1 November 2022 to 31 October 2032 |
| PT8 wood preservatives | Approved, under renewal; expiry postponed to 31 July 2031 | Expiry postponed to 31 July 2027 pending renewal |
Sources: HSE status records, GB PT8 postponement, EU PT1/2 act, EU PT3/4 act and EU PT8 postponement.
The wood-preservative dates differ. HSE's May 2026 table extends GB expiry from 31 January 2027 to 31 July 2031 after a timely renewal application. That postponement is not a completed renewal. Nor is the table an exhaustive list of approved combinations. Check the current HSE information before a supply decision.
Under review does not automatically mean banned: transitional availability depends on the relevant active substances and applicable national and BPR requirements. HSE explains these conditions in its active-substance status guidance. Check the current EU status before relying on the dates set by the approval acts above.
What the product types cover
The Biocidal Products Regulation's product-type definitions distinguish skin or scalp disinfection under PT1 from relevant surface disinfection under PT2. PT3 covers veterinary hygiene. PT4 covers food/feed-area equipment and surface disinfection, while PT8 covers preventive and curative wood preservation.
These categories describe uses, not the performance or permitted claims of a particular DDAC product. PT4 approval does not permit DDAC in every food-contact material. The PT3/4 approval act includes residue and food-contact conditions.
“Masonry cleaner” also leaves a regulatory question unresolved. Remedial treatment can fall under PT2, while preservation of non-wood construction materials falls under PT10. The intended use, rather than that short product description, determines which category needs checking.
DDAC hazards and the product SDS
The EU harmonised entry, index 612-131-00-6, lists harmful-if-swallowed and skin-corrosion hazards. The hazard statements are:
- H302: “Harmful if swallowed”.
- H314: “Causes severe skin burns and eye damage”.
The entry records Acute Tox. 4* and Skin Corr. 1B. The asterisk marks a minimum acute-toxicity classification, not a ceiling. Available data can require a more severe category under CLP Annex VI.
Do not copy those two statements into a finished-product label as a complete hazard assessment. HSE explains that mandatory classifications cover specified hazards; suppliers must self-classify hazards outside that coverage. Use the supplied formulation's current safety data sheet (SDS) and label. The active-substance entry is not the full product classification.
Check the identity and the actual product
Check the CAS number. DDAC(C8-10), CAS 68424-95-3, is a separate substance. Its PT5 non-approval decision does not establish DDAC's status.
An entry in an active-substance list does not by itself prove approval. The HSE list contains approved, evaluated and non-approved entries. Read the status for the matching substance and product type, rather than relying on a name match alone.
Older documents can also mislead. The original EU wood-preservative inclusion came through a directive. The 2024 postponement decision explains that this inclusion is treated as BPR approval. The old directive's “no longer in force” banner does not mean DDAC is banned.
RegAffairs AI's DDAC answer brings together the retrieved regulatory records.
For a GB product, check its authorisation and permitted uses separately from the active-substance entry. The HSE product register records product status, active substance, product type, dates and user category.