EU ETS compliance deadlines and installation status checks
EU ETS compliance requires a verified emissions report and allowance surrender by set dates. See the indexed fine and installation status checks.
For stationary installations with a surrender obligation, EU ETS compliance requires approved emissions monitoring, a verified emissions report and allowance surrender. For each emissions year, the report is normally due by 31 March of the following year under Article 68 of the Monitoring and Reporting Regulation (MRR). Surrender is due by 30 September of that same following year under the EU ETS Directive.
Check the competent authority's reporting deadline first. It can require submission before 31 March, but no earlier than 28 February under MRR Article 68. Do not apply these deadlines to aviation, shipping, ETS2 or UK ETS.
Set up the EU ETS compliance cycle
First confirm that the installation falls within the scope of the EU ETS Directive, and check any exclusions with the competent authority. Covered activities require a greenhouse-gas emissions permit. The approved monitoring plan forms part of the installation's permitting arrangements, as the Commission's EU ETS monitoring guidance explains. Keep the emissions year distinct from the year when reporting and surrender fall due:
| Task | Timing for 2026 emissions | What to check |
|---|---|---|
| Have an approved monitoring plan | Before the monitoring period | Authority approval and the applicable monitoring method |
| Monitor emissions | Throughout calendar year 2026 | Follow the approved plan and maintain it as arrangements change |
| Submit the verified annual report | Normally by 31 March 2027 | Check whether the authority requires an earlier date |
| Surrender sufficient allowances | By 30 September 2027 | Complete surrender, rather than only buying or holding allowances |
The Commission's EU ETS monitoring guidance says approval must precede the monitoring period. MRR Article 11 requires monitoring on an approved plan. MRR Article 68 sets the 31 March report date. Directive Article 12 sets the 30 September surrender date. For 2025 emissions, the normal reporting date was 31 March 2026 and surrender was due by 30 September 2026. Both have passed as of 8 November 2026.
Prepare EU ETS reporting and verification
The MRR requires a detailed, complete and transparent description of the monitoring method. Update the plan when monitoring arrangements change, under MRR Articles 11 to 15.
Choose an independent EU ETS verifier with the appropriate accredited scope. The Accreditation and Verification Regulation, or AVR, requires independence and reasonable assurance that the report has no material misstatement.
Booking a verifier by March does not meet the reporting deadline. You still submit the independently verified annual emissions report to the competent authority by its date. If the report is not verified as satisfactory by 31 March, Directive Article 15 blocks further allowance transfers until verification is satisfactory. That block is not the surrender deadline. The Commission EU ETS guidance describes this annual cycle.
Use the current MRR and AVR, not EU ETS phase 3 guidance. Do not use the old 30 April surrender date. Directive Article 12 sets the current installation surrender deadline at 30 September.
Surrender allowances and EU ETS fines
Surrender allowances equal to the preceding calendar year's verified emissions by 30 September. Buying allowances, or leaving them in an account, does not complete surrender under Directive Article 12. The Union Registry holds the allowances, and national administrators handle account access.
An allowance shortfall carries an excess-emissions penalty. Directive Article 16 sets a €100 base penalty for each tonne of CO2 equivalent not covered by surrender. The amount increases with the European index of consumer prices. Do not budget on €100 as a fixed 2026 rate.
Paying the penalty does not cancel the missing allowance obligation. Those allowances must still be surrendered when surrendering for the following calendar year. Member States publish the names of operators that breach the surrender requirement, and they set other penalties under Directive Article 16. Check national rules for reporting penalties rather than assuming one EU-wide late-reporting fine.
Check an installation's public compliance status
The Commission makes free allocation, verified emissions and operator compliance status public through the Union Registry. Use the records for a year-specific check, not a general compliance certificate.
- Identify the installation using the country registry, installation identifier, operator and permit information. Do not rely on its name alone. Start with the official Operator Accounts report.
- Find the relevant year in the Compliance report or an official annual download. Record the reporting year and your retrieval date.
- Read the verified emissions, surrender information and compliance symbol together. Distinguish account closure or open status from surrender compliance.
- Refer unclear records to the competent authority or national registry administrator.
Registry Regulation Annex XIII uses these symbols for the published surrender test. A and B are cumulative results, not a simple annual subtraction.
| Symbol | Meaning |
|---|---|
| A | Surrendered allowances at least cover verified emissions, on the cumulative test |
| B | The same cumulative test shows a shortfall |
| C | The preceding year's verified emissions were not entered by 30 September |
| X | Suspended registry processes prevented emissions entry, surrender, or both |
| * | The competent authority estimated or corrected the emissions |
The published surrender test is cumulative across past years, subject to the calculation rules in Registry Regulation Article 33, so two columns from the current year are not enough to spot a deficit. Free allocation is not the surrender requirement, and missing data does not mean zero emissions. C and X do not themselves quantify a surrender deficit. These distinctions follow Article 33 and Annex XIII.
RegAffairs AI's EU ETS answer covers the annual compliance cycle and public installation records.
Symbols update on 1 October and normally stay unchanged until the next annual update, apart from an added asterisk or account closure. Check the year before you rely on the result. But an A symbol does not certify current compliance with every permit or reporting obligation under the Registry Regulation.