Q.01

How do I read the hazardous materials table?

You read the US DOT Hazardous Materials Table (49 CFR 172.101) left to right across ten columns. Start by finding your material's proper shipping name in Column 2, then read across that row for its class, ID number, packing group, labels, special provisions, packaging sections, quantity limits and vessel stowage.

Approach: I worked from the current eCFR text of 49 CFR 172.101 (the section's own "purpose and use" paragraphs (a) to (l)) and the PHMSA Hazardous Materials Table entries. The eCFR also flags an amendment published at 91 FR 49310 on Aug. 4, 2026.

Worked example: Acetone

The table row reads: Acetone | 3 | UN1090 | II | 3 | IB2, T4, TP1 | 150 | 202 | 242 | 5 L | 60 L | B [1]

Col.HeadingAcetoneWhat it means (§ 172.101)
1Symbols(blank)No symbol applies. See the symbol list below.
2Description / proper shipping nameAcetoneOnly words in Roman type (not italics) are part of the proper shipping name.
3Hazard class or Division3The hazard class or division, or the word "Forbidden".
4ID numberUN1090The ID number for that shipping name.
5Packing group (PG)III, II and III mean great, medium or minor danger.
6Label codes3The first code is the primary hazard; any further codes are subsidiary hazards. Code 3 = Flammable Liquid.
7Special provisionsIB2, T4, TP1These codes are defined in § 172.102.
8A / 8B / 8CPackaging: exceptions / non-bulk / bulk150 / 202 / 242Put "§ 173." in front of each number: § 173.150, § 173.202, § 173.242.
9A / 9BMax quantity per package: passenger aircraft or passenger rail / cargo aircraft only5 L / 60 LNet quantity unless the entry says otherwise.
10A / 10BVessel stowage: location / other codesB / (blank)Stowage category; 10B codes are defined in § 176.84.

Column 1 symbols

  • +: fixes the proper shipping name, hazard class and packing group, whether or not the material actually meets that class definition.
  • A: regulated only when offered or intended for transport by aircraft, unless it is a hazardous substance or hazardous waste.
  • W: the same, but for transport by vessel.
  • D: a name suitable for domestic transport that may not be suitable internationally (for example under IMO or ICAO rules).
  • I: a name suitable for international transport.
  • G: you must add one or more technical names in parentheses (§ 172.203(k)). For example, "Flammable liquids, n.o.s." (UN1993) carries a G [2].

Rules for reading the entries

  • Rows with "see" are cross-references to another entry, for example "Petrol, see Gasoline" [3]. If both names are in Roman type, either one may be used as the proper shipping name.
  • "Forbidden" in Column 3 means the material "may not be offered for transportation or transported" [4]. That bar does not apply if the material is diluted, stabilized or built into a device and classed under Part 173.
  • One name, several rows: a name can have one row per packing group. UN1993 appears at PG I, II and III, each with its own provisions and limits [5][2][6]. Where more than one PG is listed, you assign it using the criteria in Part 173, Subpart D.
  • ID number prefixes:
    • UN: suitable for both international and domestic transport.
    • NA: not recognized outside the United States.
    • ID: recognized by the ICAO Technical Instructions.
  • No packing group is assigned to Class 2, Class 7, Division 6.2, or articles outside Class 1.
  • "None" in Column 8:
    • In 8A: no packaging exceptions.
    • In 8B: non-bulk packaging is not authorized.
    • In 8C: bulk packaging is not authorized.
    • In each case this holds unless a Column 7 special provision allows otherwise. For cylinders, both bulk and non-bulk authorizations are in 8B.
  • "Forbidden" in Column 9 means not allowed by that mode. A package that is forbidden on passenger aircraft, or that exceeds the 9A quantity, "shall be labelled" CARGO AIRCRAFT ONLY (§ 172.448).
  • Combustible liquid: a Class 3 entry reads as "Combustible liquid" if the material is reclassed under § 173.150(e) or (f), or has a flash point above 60 °C but below 93 °C. No label is required for combustible liquids.
  • Vessel stowage categories (10A):
    • A: on deck or under deck, on cargo or passenger vessels.
    • C: "on deck only".
    • B, D and E: these depend on how many passengers the vessel carries.
    • 01 to 05: these use closed cargo transport units.
    • Limited quantities are allocated category A and are not subject to the 10B codes.

If your material isn't listed by name

  • Unless the entry carries a +, describe the material by its correct class, PG and subsidiary hazard.
  • If it is not named in the table, use the generic or n.o.s. entry that most accurately describes it (for example "Alcohol, n.o.s." in preference to "Flammable liquid, n.o.s.").
  • If it meets more than one hazard class, use the precedence rules in § 173.2a.
  • A hazardous waste's proper shipping name "shall include the word 'Waste'" in front of it, for example "Waste acetone".

Source: eCFR, 49 CFR 172.101, paragraphs (a) to (l).

If you give me a specific material or UN number, I can pull its row and walk through what each column requires for your shipment.

Q.02

How do I choose the right shipping entry?

You pick the most specific entry the § 172.101 Table allows, working down a fixed order. First comes the material's own technical name. Next is a named mixture or solution form, then a generic or "n.o.s." entry that matches its class, packing group and subsidiary hazards. Where there are several hazards and no named entry, § 173.2a decides which hazard is primary. A name is only valid if your material actually meets the class, packing group (PG) and subsidiary hazard shown on that row. The one exception is a "+" entry, which fixes the description whatever the material's actual hazards.

Approach: I used the PHMSA Hazardous Materials Table in our datasets for the example entries, and the current eCFR text of 49 CFR 172.101(c) and § 173.2a for the selection rules. The eCFR flags an amendment to § 172.101 published at 91 FR 49310 on Aug. 4, 2026.

Step 1: Classify the material first

You can only choose a row once you know the material's class or division, its PG and any subsidiary hazards, using the Part 173 criteria. Under § 172.101(c)(12)(iv), a material that is not forbidden and meets no hazard class "is not a hazardous material."

Step 2: Look for the material by name

  • It is listed by technical name: use that entry, for example "Ethanol or Ethyl alcohol..." UN1170 [7].
  • A "see" row points elsewhere: if both names are in Roman type, either one may be used (c)(5). For example, "Ethyl alcohol, see Ethanol" [8].
  • Choose the right row: many names have one row per PG, so pick the row for the PG you determined. Ethanol has separate PG II and PG III rows with different provisions and limits [9][7].
  • Your material's hazards differ from the row: under (c)(12)(i), if it meets a different class, PG or hazard zone, or lacks a subsidiary hazard shown in Column 6, it "shall be described by" a name listed with the correct values. This rule does not apply to "+" entries.

Step 3: Mixtures and solutions, § 172.101(c)(10)

  • One main hazardous ingredient that is named in the Table: you "must" use that ingredient's name plus "mixture" or "solution". You cannot do this if any of the following apply:

    • (A) the Column 8 packaging does not suit the physical state;
    • (B) the entry covers only the pure or technically pure material;
    • (C) the class, PG or subsidiary hazard is different;
    • (D) emergency measures change significantly;
    • (E) a poisonous-by-inhalation special provision no longer fits;
    • (F) an application name describes the material better.

    If any of these apply, go to Step 4.

  • Two or more hazardous ingredients in the same class, none named: use an appropriate n.o.s. description.

Step 4: Generic or n.o.s. entries, § 172.101(c)(12)(ii)

  • Use the name that "most appropriately describes" the material. An unlisted alcohol is "Alcohol, n.o.s." UN1987 [10], not "Flammable liquids, n.o.s." UN1993 [2].
  • Application names can be better than n.o.s. For example, "Paint (including paint, lacquer, enamel...)" UN1263 [11].
  • "G" entries need technical names. Entries marked "G" in Column 1 require technical names in parentheses, and UN1993 is one of them [2]. For mixtures, the technical names of at least two main hazard contributors may be required.

Step 5: More than one hazard and no named entry, § 173.2a

  1. Rank the hazards in this order:
    1. Class 7;
    2. Division 2.3, then 2.1, then 2.2;
    3. Division 6.1 PG I poisonous by inhalation;
    4. pyrophoric materials (Division 4.2);
    5. self-reactive materials (Division 4.1);
    6. Classes 3 and 8 and Divisions 4.1, 4.2, 4.3, 5.1 and 6.1, which are resolved with the Precedence of Hazard Table;
    7. combustible liquids;
    8. Class 9.
  2. Note the exceptions in § 173.2a(c). Class 1 materials are always assigned a Class 1 division, organic peroxides are always Division 5.2, and infectious substances are Division 6.2 (except where Class 7 applies). Wetted explosives and limited-quantity Class 7 materials have their own rules.
  3. The packing group is always the most stringent one (Note 1). For example, Class 3 PG II combined with 6.1 PG I (oral) is classed as Class 3 PG I.
  4. Choose the entry whose wording matches the result. The primary hazard comes first in the name:
    • Class 3 PG II with 6.1 PG II: the table gives Class 3, so use "Flammable liquids, toxic, n.o.s." UN1992 PG II, labels 3 and 6.1 [12].
    • Class 3 PG III with 6.1 PG II: the table gives 6.1 and the PG goes up to II, so use "Toxic liquids, flammable, organic, n.o.s." UN2929 PG II, labels 6.1 and 3 [13].
    • Class 3 PG III with 6.1 PG III: the result is Class 3. For pesticides only (footnote 4), the primary hazard is 6.1 PG III.
    • Class 3 with Class 8: Class 8 takes precedence over Class 3 PG II only at 8 PG I liquid, and over Class 3 PG III at 8 PG I or II liquid. Otherwise Class 3 stays primary, for example "Flammable liquids, corrosive, n.o.s." UN2924 [14].

Special cases in § 172.101(c)

  • Hazardous waste (c)(9): the name "shall include" the word "Waste" in front, unless the entry already contains it.
  • Wastes and samples whose class must be found by testing (c)(11): these may take a tentative name, class, ID number and PG. A non-waste sample "must" carry the word "Sample". It must also travel in combination packaging of at most 2.5 kg net per package.
  • Self-reactive materials and organic peroxides (c)(13): choose the generic name from the technical name and concentration, under § 173.224 or § 173.225.
  • Isomers and hydrates (c)(14)-(15): an all-isomers name, or the anhydrous substance's name, may be used if the hazard class, subsidiary risks and PG are the same and the isomer or hydrate is not listed separately.
  • Qualifying words (c)(4), (6), (8), (16), (17): "liquid", "solid", "molten" and "stabilized" may be added within limits. The actual concentration may replace a stated range. Apart from wastes, the order of qualifying words is optional.
  • Last resort: a material with no other hazard may fall to the Class 9 entries, such as "Environmentally hazardous substance, liquid, n.o.s." UN3082 [15].

Sources: eCFR 49 CFR 172.101, paragraph (c); eCFR 49 CFR 173.2a.

If you give me your material's composition and test data (flash point, toxicity, corrosivity), I can work through the precedence and pull the exact Table row.

Q.03