Q.01

What does the EU Ecolabel mean for textile products?

For textile products, the EU Ecolabel shows that a product meets the ecological criteria in Commission Decision 2014/350/EU, adopted under Regulation (EC) No 66/2010. The criteria cover fibre sourcing, hazardous chemicals, pollution from production, durability and labour conditions. The Decision says the criteria "reflect the best environmental performing products on the market of textiles". It also says a product with the label "guarantees the consumer that the use of such substances has been limited to the extent technically possible without prejudice to the fitness for use" (EUR-Lex consolidated text, 06.01.2026).

Approach: I went through all 28 criteria in the Annex of the current consolidated Decision 2014/350/EU. I checked its Articles (scope, validity and transitional rules) against the consolidated text on EUR-Lex.

Status and scope (Articles 1–9, EUR-Lex)

  • Status: In force. It has been amended by Decisions (EU) 2017/1392, 2020/1805 and 2026/66. The criteria "shall be valid until 31 December 2028" (Article 6, as amended by 2026/66). The product group's code is '016' (Article 7).
  • What it covers:
    • Clothing, accessories and interior textiles that are at least 80 % textile fibres by weight, in woven, non-woven or knitted form.
    • Intermediate products: fibres, yarn, fabric and knitted panels.
    • Non-fibre parts such as zips, buttons, membranes, coatings and laminates.
    • Textile cleaning products.
  • What it excludes:
    • Products meant to be thrown away after one use.
    • Floor coverings (these fall under Decision 2009/967/EC).
    • Fabrics that are part of outdoor structures.
    • Items with electrical devices, or with devices or impregnated substances designed to sense or react to changes in ambient conditions.
  • Counting the fibre share: Fillings, linings, padding, membranes and coatings need not be counted when working out the textile-fibre percentage (Article 3). Fillings not made of textile fibres must still meet the criterion 10 restrictions (Article 4).

What a licensed product has to meet

1. Fibre criteria (criteria 1–9)

  • Cotton: At least 10 % organic or 20 % IPM cotton. For T-shirts, women's tops, casual shirts, jeans, nightwear, underwear and socks this rises to 95 % organic or 60 % IPM. Baby clothing for under-3s must have at least 95 % organic cotton. Conventional and IPM cotton must be grown without a listed set of pesticides, with a 0,5 ppm cap on the sum detected in testing [1].
  • Wool: Limits on ectoparasiticide residues, and COD limits for scouring effluent of 25 g/kg (coarse wool) and 45 g/kg (fine wool) [2].
  • Polyester:
    • Antimony no more than 260 ppm.
    • Consumer products need recycled PET: at least 50 % in staple fibres and 20 % in filament fibres.
    • Products sold mainly to commercial or public-sector customers may instead meet the VOC emission limits [3].
  • Polyamide: Either at least 20 % recycled nylon, or N2O from monomer production no more than 9,0 g/kg [4].
  • Viscose, modal and lyocell: At least 25 % of pulp from sustainably managed forests. No elemental chlorine bleaching. Limits on sulphur emissions [5].
  • Other fibres: There are also criteria for flax and other bast fibres, acrylic, elastane and polypropylene [6][7][8][9].

2. Components and accessories (criteria 10–12) Fillings, coatings, membranes, zips, buttons and fasteners must meet the fibre criteria and the restricted substance list (RSL) in Appendix 1 [10][11][12].

3. Chemicals and processes (criteria 13–16)

  • Restricted substance list:
    • Neither the final product nor its production recipes may contain RSL substances at or above the set limits.
    • Each product line is tested on application and once a year after that.
    • If a test fails, that product line is retested. A second failure suspends the licence for that line.
  • SVHCs: Substances on the REACH Candidate List are excluded unless specifically derogated. No derogation is given above 0,10 % w/w in the article or any homogeneous part of it [13].
  • Hazard-based substitution (criterion 14):
    • Dyeing, printing and finishing chemicals that remain on the product must not carry the listed CLP classifications. These include CMR (Categories 1A, 1B and 2), sensitisers, acute toxicity, STOT, aquatic hazards and EUH059.
    • Exceptions apply only to the derogated groups in Table 6, each with its own conditions: dyestuffs, flame retardants (including antimony trioxide backcoating, subject to its conditions), optical brighteners, repellents and auxiliaries [14].
  • Energy: Energy use in washing, drying and curing must be measured and benchmarked in an energy management system (for example ISO 50001), and production sites must apply a minimum number of best available technique (BAT) measures [15].
  • Emissions:
    • Wastewater no more than 20 g COD/kg of textiles processed.
    • Air emissions from printing and finishing no more than 100,0 mg C/Nm3, or 150,0 mg C/Nm3 where solvents are recovered and reused [16].

4. Fitness for use (criteria 17–25)

  • Shrinkage: Limits on dimensional change, for example ±3,0 % for woven cotton [17].
  • Colour fastness:
    • Washing and perspiration: at least level 3-4 [18].
    • Wet rubbing at least 2-3 and dry rubbing at least 4, with lower levels allowed for denim [19][20].
    • Light: at least level 5 for furniture, curtain and drape fabrics, and level 4 for other products [21].
  • Pilling: Resistance to pilling [22].
  • Cleaning products: Wash resistance and absorbency [23].
  • Durable finishes: Repellent, flame-retardant and easy-care finishes must last. For example, flame retardancy must survive 50 industrial washes at 75 °C or more [24].

5. Social criteria (criteria 26–27)

  • Cut/make/trim sites must observe the ILO core labour standards. Compliance is verified by a third party, including auditor site visits [25].
  • Manual and mechanical sandblasting of denim is not permitted [26].

What the label can say (criterion 28)

The optional text box may say:

  • "More sustainable fibre production"
  • "Less polluting production processes"
  • "Restrictions on hazardous substances"
  • "Tested for durability"

Content claims are allowed only above set thresholds. For example, "Made with organic cotton. Only GMO-free cotton used" requires more than 95 % organic cotton, and "Made with xx % recycled polyester" requires more than 50 % recycled content [27].

I can go into the Appendix 1 RSL limits, or the derogation conditions for a specific chemistry such as flame retardants or repellents, if useful.

Q.02

How do textile suppliers apply for the EU Ecolabel?

Textile suppliers apply through a national Competent Body in the EEA, not to the Commission. They send that body a dossier showing the product meets each criterion of Decision 2014/350/EU, pay its fees, and register the product in the Commission's EU Ecolabel catalogue (ECAT). The licence is awarded once the Competent Body approves the dossier.

Approach: The EU Ecolabel textile criteria in the datasets gave me the evidence each criterion requires. I took the procedure, fees and catalogue steps from the Commission's EU Ecolabel pages and documents. I couldn't open the text of Regulation (EC) No 66/2010 on EUR-Lex, so the legal limits below come from the Commission's summary of it, not the Regulation itself.

Who can apply, and to which Competent Body

  • Who can apply: The Commission lists "producers, manufacturers, importers, service providers, and wholesalers" for products sold in the EEA, which is the EU plus Liechtenstein, Norway and Iceland (Green Forum, How to apply).
  • Retailers and brands: The textile user manual adds that traders and retailers "may also apply but can only submit applications for products marketed under their own brand names". One application covers the whole EEA (Textile Products User Manual v2.0, p.5).
  • Which Competent Body (Green Forum):
    • Product made in one EEA country: that country's body.
    • Made in several EEA countries: any of the bodies involved.
    • Made outside the EEA (for example in Asian mills): the body of any Member State where the product will be sold.

The five steps the Commission sets out (Green Forum)

  1. Contact the Competent Body, through its national online system where one exists, or by email.
  2. Pre-register in ECAT. The product is shown publicly only once the application is approved.
  3. Prepare the full application using the textile user manual: "declarations, supporting documents, data sheets, and test results".
  4. Submit and pay the application fee. The Competent Body checks within two months whether the file is complete. You then have six months to complete it, or the application may be rejected.
  5. After approval, use the logo and enter GTIN codes in ECAT.

Setting up ECAT (ECAT user manual, Jan 2026):

  • Create an EU Login account and register your company. The Competent Body validates new organisations, which "may take a few days".
  • Create a licence under the textile product group and click "Send to CB".
  • The status then moves from Draft to New application request, and then to Awarded (or Awarded – Partial, or Rejected). Only awarded products appear in the public catalogue.
  • A GTIN code (preferably EAN-13) "must" be entered unless the product has none. E-retailers such as Amazon use ECAT data to verify ecolabelled products.

Building the textile dossier

For textiles, most of the work is collecting evidence from your supply chain. The application form is Part C of the textile user manual, the declarations are Part D, and there is an Excel declaration template for Appendix I (textile user manual page). Some examples from the criteria text:

  • Cotton:
    • Organic content "should be certified by an independent control body", with verification yearly for each country of origin.
    • IPM cotton needs evidence of farmer training programmes or third-party certified schemes.
    • Pesticide test reports to US EPA 8081 B, 8151 A, 8141 B and 8270 D, on raw cotton sampled before wet treatment.
    • Traceability shown through transaction records or invoices up to greige fabric [1].
    • The manual says GOTS, Fair Trade, Organic Exchange Blended and OEKO-TEX 100 certification (or equivalent) "shall be accepted" for the traceability sub-criterion 1(d) (p.11).
  • Restricted substance list (criterion 13):
    • The RSL "shall be communicated to suppliers and agents" in spinning, dyeing, printing and finishing.
    • The applicant provides a declaration of compliance. It is backed by declarations from each production stage, safety data sheets for production recipes (with chemical supplier declarations where the SDS are incomplete), and lab tests on the final product.
    • Testing is done "upon application and once a year thereafter for each product line", with results sent to the Competent Body.
    • Results from industry RSL testing are accepted where the methods are equivalent and the sample is representative.
    • If a product line fails, it is retested. A second failure suspends the licence for that line [13].
  • SVHCs: Each production stage's substances and recipes are screened against ECHA's current Candidate List, and the applicant compiles declarations from each stage [13].
  • Test laboratories: Competent Bodies prefer attestations from laboratories accredited to harmonised standards. Accredited labs can be found through the European co-operation for Accreditation (EA) directory (Green Forum).
  • Changes after award: If you change products or suppliers, send the Competent Body supporting documents and an updated supplier list (manual, Table 1, p.7).

Fees (EU Ecolabel Fees Table, Feb 2026)

Each Competent Body sets its own fees within Annex III of the Regulation, as summarised by the Commission:

FeeLimits
Application€200 to €2 000 for large companies; up to €600 for SMEs and applicants from developing countries; up to €350 for micro-enterprises
Reductions on the application feeEMAS-registered −30 %, ISO 14001 −15 %; the two cannot be combined
Annual (optional)Flat rate, or no more than 0.15 % of annual sales of the ecolabelled product; maximum €25 000 per product group per applicant; at least 25 % off for SMEs, micro-enterprises and developing-country applicants
InspectionMay be charged for on-site audits

National fees vary widely. For example, Germany charges €1 800, the Netherlands €2 000 and Italy €1 200 as standard application fees. Several bodies charge daily rates plus travel for inspections outside their country, which matters for non-EEA production sites.

Timing points

  • Criteria validity: The textile criteria are valid until 31 December 2028, and the Commission lists the revision as ongoing (Green Forum, Textile Products).
  • Expiry: ECAT shows a licence as "Cancelled" when a criterion has expired, and all related licences are cancelled automatically (ECAT user manual, Ch. 3). Plan for a new application under the revised criteria.
  • Out-of-date manual: The textile user manual is Version 2.0 (July 2019). It reflects Decisions 2014/350/EU and 2017/1392 only, not the later amendments, and it says it "does not have any legal standing".

I can map the Part D declarations against your supply chain (for example spinner, dye house, finisher) if you tell me which fibres and processes your product involves.

Q.03

How can buyers check an EU Ecolabel licence?

Buyers check an EU Ecolabel licence in the Commission's public EU Ecolabel Product Catalogue (ECAT). You can search it by licence number, product name or company name. A product counts as currently licensed only if it appears there, because the catalogue shows only licences with "Awarded" status.

Approach: The datasets hold the EU Ecolabel textile criteria (Decision 2014/350/EU) but no licence register. The verification steps below come from the Commission's Green Forum pages and its ECAT user manual (January 2026). I couldn't open the Commission's EU Ecolabel FAQ page.

1. Read the licence number on the product

  • The Commission says a licence number "has the following form: XX/YYY/ZZZ". XX is the country of registration, YYY is the product group, and ZZZ is the number the Competent Body gave the applicant (Green Forum, Product groups and criteria).
  • For textiles, the middle block should be the product group code that Article 7 of Decision 2014/350/EU assigns, '016' (EUR-Lex consolidated text). If the number shows a different product group, it does not cover textiles under these criteria.

2. Search for it in ECAT

  • Go to the EU Ecolabel Product Catalogue. You can "discover EU Ecolabel products by filtering for a category/product group or by searching for a specific licence, product or company" (Green Forum, Retailers).
  • Each entry shows the licence number, the company name, the product sub-category and the countries where the product is available. For example, one entry reads "DE/027/320", Nils AG, available in Germany (ECAT entry).
  • Check that the company, product and sales country match what you are buying.

3. Understand what being listed (or not) means

These points come from the ECAT user manual, Chapter 3 (ECAT user manual, Jan 2026):

  • "Only awarded applications will be visible on the public catalogues."
  • If a licence is only partly awarded ("Awarded – Partial"), only the products that were awarded are shown.
  • While a licence holder's changes to a product are waiting for Competent Body approval, that product is not shown.
  • Draft, pending, rejected and cancelled licences are not public. "Cancelled" covers a Competent Body cancellation and also the case where "a criterion has expired, and all related licences have been cancelled automatically". This matters for textiles because the current criteria run until 31 December 2028.

4. Match by product code (bulk or e-commerce checks)

  • Licence holders "must insert a Global Trade Item Number (GTIN) product code in ECAT (preferably the EAN-13 code)", unless the product has none.
  • E-retailers use these codes "to verify that a product (both B2B and B2C) is certified". Platforms such as Amazon use public ECAT data extracts as a verification source (ECAT user manual, pp. 9–10).
  • For checks across many products, the Commission publishes ECAT data as CSV files on the EU Open Data Portal and through APIs (Green Forum, Retailers).

5. Check the claims next to the logo

Under criterion 28, the optional text box may only use the set wording, and fibre-content claims need a minimum share of that fibre [27]. For example:

ClaimMinimum required
"Made with organic cotton. Only GMO-free cotton used"more than 95 % organic content
"Made with xx % organic cotton"more than 50 % organic
"Cotton grown with reduced pesticides"more than 70 % IPM
"Made with xx % recycled polyester"more than 50 % recycled
"Made with recycled nylon"more than 95 % recycled

6. If something doesn't match

The Commission points to the national Competent Bodies and the EU Ecolabel Helpdesk for questions (Green Forum, Retailers). The Competent Body that issued the licence is the one named by the country prefix of the licence number.

If you share a supplier's licence number or label wording, I can look up the ECAT entry and check the claims against criterion 28.

Q.04