Q.01

What is eCTD?

eCTD (electronic Common Technical Document) is the electronic format for building and submitting a medicine's registration dossier. The dossier itself is organised according to the ICH Common Technical Document (CTD). The FDA describes eCTD as "the standard format for submitting applications, amendments, supplements, and reports" to CDER and CBER (FDA eCTD page).

The CTD it is built on (ICH M4)

  • Purpose: ICH M4 sets "the agreed upon common format" for a well-structured CTD for applications to regulatory authorities. It says this format "will ease the preparation of electronic submissions" and make it simpler for authorities to exchange information [1]. It replaced each region's own layout (Japan's GAIYO, EU Expert Reports, the FDA's NDA format) with one format accepted in all three regions [2].
  • Structure: the CTD has five modules. Module 1 is specific to each region. Modules 2-5 are common to all regions; together they cover the summaries, quality, nonclinical and clinical sections [3].
  • Paper vs electronic: each document in a paper dossier corresponds to one file in an electronic submission, and the two should be split up to the same level of detail. When a paper dossier is converted to electronic, the split may change to make lifecycle management easier [4].
  • Versions: M4(R4) gives separate tables for eCTD v3.2.2 and eCTD v4 submissions, and for eCTD v3.2.2 it points to the separate ICH eCTD Q&As for more guidance [5][6]. The ICH M4 Q&As send applicants to regional guidance for specific eCTD submission rules [7].

What the FDA requires (FDA eCTD page)

  • Who must use it: NDAs, ANDAs, BLAs, commercial INDs and every later submission to them must be in eCTD. So must master files such as DMFs that are submitted to these application types.
  • Versions accepted: submissions "must use a version of eCTD currently supported by FDA, either v3.2.2 or v4.0", as listed in the FDA Data Standards Catalog.
  • Moving to v4.0: from 16 October 2026, CDER and CBER support "Forward Compatibility", meaning applications first submitted in v3.2.2 can continue in v4.0. The FDA will give advance notice before v4.0 becomes the only accepted version.

Approach: I searched the ICH M4 CTD guidelines and their Q&As, and the FDA's eCTD page. The ICH M8 eCTD technical specification is not in the datasets, and ICH's own eCTD web pages would not open.

Q.02

How does eCTD differ from CTD?

The CTD and eCTD differ in kind. The CTD (ICH M4) sets the content and how the dossier is organised. The eCTD is the electronic way of submitting that same dossier, adding file-level structure, version-specific rules and a way to update documents over the product's life. ICH set up the CTD format partly so that it "will ease the preparation of electronic submissions" [1].

What stays the same

  • Same modules and headings. The M4(R4) granularity annex has one set of tables for "paper and eCTD" submissions. Modules 4 and 5 follow the same granularity under every eCTD standard [8][9][10].
  • Same way of splitting documents. In paper, a document is a set of pages numbered in sequence and separated by a tab. In eCTD, each document is one file, and a new file starts where a tab would divide documents on paper. ICH says the granularity of paper and electronic submissions "should be equivalent" [4].

Where eCTD differs

PointPaper CTDeCTD
Unit of submissionTabbed, paginated documentOne file per document [4]
Table of contentsModule 3 TOC "is only called for in the paper version of the CTD" [11]"A TOC is not applicable for eCTD" [12]
Granularity rulesOne set of headingsFor Modules 2.3 and 3, the recommended granularity depends on the eCTD version used [10]. Some documents "may be written at this level but must be submitted at the higher level" for eCTD [11]
VersionsNoneSeparate tables for eCTD v3.2.2 and v4. v3.2.2 users are also pointed to the ICH eCTD Q&As [5][13]
Lifecycle managementNot addressed in the same wayGranularity can change when a paper dossier is converted, to help "on-going lifecycle management" [4]. When content changes, "replacements of complete documents/files should be provided" [14]. Once chosen, a granularity option should be kept for the whole lifecycle of the application [15]
Extra eCTD v4 featuresNoneA new "blue" granularity level in Module 3 [16]. A "manufacturer" keyword to manage multiple 3.2.S/3.2.P sections [17]. A "suspended" status code for content you no longer want to maintain [18]

Regional rules: the CTD content is harmonised by ICH. The ICH M4 Q&As send applicants to "regional guidance for specific guidance on eCTD submissions" [7].

Approach: I searched the ICH M4 CTD guideline family (M4(R4) and its Q&As) and the wider ICH M-series guidelines. The ICH M8 eCTD technical specification is not in the datasets I searched, so the technical details of the eCTD format itself are not covered here.

Q.03