REGAFFAIRS AI
Guide · 2026-11-07 · 3 min

21 CFR 177.1520 food-contact requirements for olefin polymers

21 CFR 177.1520 covers specified olefin polymers for food contact. Check resin identity, specifications, additives and use limits before accepting a grade.

21 CFR 177.1520 is the FDA regulation for specified olefin polymers used in food-contact articles or components. It permits use only when the polymer meets the applicable identity, specifications, adjuvant requirements and use restrictions.

A polyethylene or polypropylene label alone does not establish finished-package compliance. Start with the exact resin grade, then check its additives and intended use against the relevant provisions.

What 21 CFR 177.1520 covers

Paragraph (a) lists polypropylene, polyethylene, specified copolymers and other olefin polymers. Manufacturing routes and compositions have separate entries. Match the grade to its listed polymer identity; don't assume every material sold as a polyolefin qualifies.

Read the remaining provisions against that identity:

  • Paragraph (b) covers optional adjuvant substances used in producing the polymer or finished article. These substances need an applicable regulatory basis and may have separate limits.
  • Paragraph (c) gives specifications by table row. Depending on the entry, these include density, melting or softening point, n-hexane-extractable fraction and xylene-soluble fraction. Rows can also restrict use.
  • Paragraph (d) gives analytical methods. The basic polymer is tested as film no thicker than 4 mils. This concerns the test specimen, not all finished packaging.

The row matters. For example, polyethylene item 2.1 excludes packing or holding food during cooking, while item 2.2 addresses that application. There is no universal set of olefin limits in paragraph (c).

What to request from your resin supplier

FDA says each substance making up a food-contact article determines its regulatory status. It suggests requesting a manufacturer's letter of guaranty covering the intended use. That letter is supplier evidence, not an FDA-issued approval certificate.

Use these requests to check whether the supplier's statement covers your application:

  1. Identify the exact resin grade and applicable paragraph or table item.
  2. Request supporting results or a specification-compliance statement for the relevant paragraph (c) row and paragraph (d) methods.
  3. Ask for the regulatory basis and restrictions for additives, colorants and processing aids.
  4. Specify the food, contact time, temperature and single-use or repeated-use application.
  5. Check components added during converting and the finished article, rather than relying solely on the base-resin letter.

These are practical requests, not a universal statutory document list. They follow the section's identity, specifications and adjuvant provisions and FDA's documentation advice. Supplier paperwork does not replace an applicable authorization.

Keep the use description precise. FDA's food-type and conditions-of-use tables distinguish food categories and processing or storage conditions. They do not independently authorize a substance. A section citation alone does not establish permission for hot-fill, cooking, microwave reheating or unlimited repeated use.

A base-resin citation does not establish that its colorants or processing aids suit the same use. Check their restrictions separately under paragraph (b), even when the resin grade meets its own specifications.

The resin letter is only part of the check. Paragraph (f) addresses polymers used as components of food-contact surfaces in articles covered by another specified regulation. They must meet that regulation's applicable specifications and limitations for the article in its finished form. Section 174.5 also requires good manufacturing practice and suitable purity. Quantities must be no greater than reasonably required for the intended technical effect.

Which food-contact section applies?

21 CFR Part 177 is not the only place to check. Use the material or application to find the relevant provision:

Material or applicationSection
Olefin polymers177.1520
Food-packaging adhesives175.105
Resinous and polymeric coatings175.300
Paper and paperboard surfaces for aqueous and fatty foods176.170
Rubber articles intended for repeated use177.2600
Colorants for polymers178.3297

These sections have their own conditions, not interchangeable clearances. The adhesive exclusion in paragraph (g) applies specifically to olefin polymers identified in 175.105(c)(5). They must be used in food-packaging adhesives complying with 175.105.

RegAffairs AI's answer on polypropylene packaging and supplier evidence covers this question. For UK supply, an FDA citation does not replace the applicable UK food-contact requirements.

Related guides