REGAFFAIRS AI
Guide · 2026-11-08 · 4 min

EPA aquatic life criteria and how to read the national table

EPA aquatic life criteria recommend concentrations that protect aquatic organisms. Read CMC and CCC, check units, then confirm the standard and permit.

EPA aquatic life criteria recommend pollutant concentrations or narrative conditions to protect aquatic organisms in surface waters. They are section 304(a) recommendations that do not themselves impose legally binding requirements, and the national table separates freshwater and saltwater acute and chronic values.

For a compliance check, start with the recommendation, then find the water body's applicable standard and permit conditions. Where aquatic life is a designated use, water quality standards include that use, criteria that protect it and antidegradation requirements.

How to read the aquatic life criteria table

Use the EPA table to look up criteria for individual pollutants. It gives freshwater and saltwater values for two types of exposure:

LabelFull nameEffects addressed
CMCCriterion Maximum ConcentrationAcute
CCCCriterion Continuous ConcentrationChronic

The water-concentration headings use µg/L. Read the footnotes. Row-specific notes and linked documents can change how you interpret a value. A blank cell is not zero or permission to discharge.

A criterion has a concentration, an averaging duration and an exceedance frequency. The conventional acute and chronic formulation uses a one-hour average and a four-day average, generally not exceeded more than once every three years on average, but that formulation is not universal. Freshwater ammonia has a 30-day chronic period. Check the pollutant document rather than assigning the same averaging period to every row. EPA's aquatic life criteria methods page links the derivation guidance and the duration and frequency resources.

Ammonia criteria depend on water conditions

EPA's freshwater ammonia recommendation dates from 2013, and EPA issued a corrected acute equation in 2018. Use the corrected document linked from that page. At pH 7 and 20 °C, the 2013 ambient water quality criteria fact sheet for freshwater ammonia gives these reference values:

  • Acute: 17 mg total ammonia nitrogen (TAN)/L, as a one-hour average.
  • Chronic: 1.9 mg TAN/L, as a 30-day average.

Each has an exceedance formulation of not more than once every three years on average. The highest four-day average within the 30-day period must not exceed 2.5 times the chronic criterion.

Those reference values are conditional, not universal limits. Ammonia criteria depend on pH, temperature and relevant biological or site-specific provisions. TAN expressed as nitrogen is not the same measurement as un-ionized ammonia. Use the corrected equations and the applicable standard, not an unadjusted reference number. The freshwater recommendation also did not replace the separate saltwater ammonia recommendation.

Selenium needs tissue and water checks

The 2016 freshwater selenium criterion, revised in 2021, addresses chronic effects from bioaccumulation and reproductive harm. It is a multi-element criterion. Do not collapse it to one water number or one tissue number.

The EPA selenium fact sheet gives water-column elements of 1.5 µg/L for lentic waters and 3.1 µg/L for lotic waters. Both are 30-day averages. Tissue elements are 15.1 mg/kg dry weight in fish egg/ovary, 8.5 mg/kg dry weight whole body and 11.3 mg/kg dry weight muscle. Intermittent exposure uses a separate equation.

Suitable egg/ovary measurements generally take precedence over other tissue measurements. Suitable steady-state tissue data generally take precedence over water-column data. But that hierarchy has a condition: where selenium inputs are increasing, water-column elements apply if steady-state fish-tissue data are absent. Read the revised criterion before selecting an element.

The water-column values concern dissolved total selenium. Don't compare water µg/L directly with tissue mg/kg dry weight, or substitute wet-weight tissue results.

Chloride criteria and the unit conversion

The national table's freshwater chloride row lists a CMC of 860,000 µg/L and a CCC of 230,000 µg/L. Those equal 860 mg/L and 230 mg/L. The publication year is 1988, and the table shows no saltwater chloride values.

The factor of 1,000 is easy to miss. These concentrations in the national table refer to chloride, not chlorine residual, sodium chloride mass or total dissolved solids. Consult the pollutant document and the applicable standard for the averaging and exceedance requirements.

Nutrient criteria are not one national pair of values

EPA's 2021 lakes and reservoirs recommendations address total nitrogen and total phosphorus. They use stressor-response models and tools to derive locally appropriate values, rather than one nationwide CMC/CCC pair.

The recommendations address aquatic life, recreation and drinking-water-source uses. Do not extend the lake and reservoir framework automatically to every stream, estuary or coastal water.

Human health criteria use a different table

Human health water quality criteria protect people rather than aquatic organisms. Their table separates "water + organism" from "organism only" exposure, rather than acute CMC from chronic CCC.

The human health table reports ambient concentrations in µg/L. "Organism only" does not mean a fish-tissue value in mg/kg. Neither the aquatic life table nor the human health table substitutes for drinking-water maximum contaminant levels.

Check the applicable standard before using a number

States and authorized Tribes can adopt EPA recommendations or scientifically defensible alternatives. Work through these checks:

  1. Identify the pollutant and whether the receiving water is freshwater or saltwater.
  2. Read its table row, footnotes and linked recommendation, including duration and frequency.
  3. Match sample units and chemical form. For ammonia, check pH and temperature. For selenium, distinguish tissue from water.
  4. Check the applicable water quality standard and permit conditions. Use the EPA-approved or federally promulgated standard, not a national ambient criterion as an end-of-pipe limit.
  5. Retain the source and version used, alongside the applicable standard.

RegAffairs AI's answer on EPA aquatic life criteria explains the table and these pollutant examples.

Related guides