REGAFFAIRS AI
Guide · 2026-11-08 · 5 min

Hazardous materials table explained for US hazmat shipping

Read the hazardous materials table in 49 CFR 172.101 to find shipping names, hazard classes, packaging references, labels and transport quantity limits.

The US DOT hazardous materials table, 49 CFR 172.101 in 49 CFR Part 172, identifies shipping descriptions and directs you to packaging, labels, quantity limits and vessel stowage. Find the appropriate entry in Column 2, then read all ten numbered columns. Columns 8, 9 and 10 also have subdivisions.

A matching name alone doesn't authorize a shipment. Apply the row to the material and the mode you intend to use.

How to read the hazardous materials table's ten columns

The DOT hazmat table has ten numbered columns, but Columns 8, 9 and 10 contain subdivisions. This reference follows §172.101(b)-(k).

ColumnWhat to read
1Symbols that qualify how the entry applies: +, A, D, G, I and W.
2Hazardous materials descriptions and proper shipping names. Roman type identifies the proper shipping name; italicized words are not part of it, although you may add them.
3Hazard class or division, or "Forbidden."
4Identification number, including its UN, NA or ID prefix.
5Packing group, where assigned: I means great danger, II medium danger and III minor danger.
6Label codes, with the primary hazard first and subsidiary hazards after it. Exceptions and additional labeling rules still apply.
7Special-provision codes. Read their meanings in §172.102.
8Packaging references: 8A for exceptions, 8B for non-bulk packaging and 8C for bulk packaging.
9Maximum quantity per package: 9A for passenger-carrying aircraft or passenger-carrying rail cars; 9B for cargo aircraft only.
10Vessel stowage: 10A gives the location/category; 10B gives other stowage and handling provisions.

Column 8 numbers are section references, not package quantities. For example, 202 refers to §173.202. Read the referenced section alongside Column 7 and the general packaging requirements.

"None" in Column 8A means no packaging exceptions are authorized, except as Column 7 special provisions provide. In 8B, the same word means non-bulk packagings are not authorized, except as those special provisions provide. In 8C, it means bulk packagings are not authorized, except as Column 7 special provisions or Column 8B packaging authorizations provide.

Column 9 quantities are normally net quantities unless otherwise specified. Check the printed unit, such as L or kg. "Forbidden" here applies to that transport mode. It differs from "Forbidden" in Column 3. These instructions come from §172.101(i)-(j).

For vessels, interpret Column 10B codes under §176.84, not §172.102. Column 10A categories include 01-05 as well as A-E. Use the definitions in §172.101(k) rather than guessing from the letter or number.

Check Column 1 before using the entry

Hazardous materials table Column 1 has six symbols, and they change how you apply a row. Under §172.101(b):

    • fixes the proper shipping name, class and packing group regardless of whether the material meets those classification definitions. Qualifications apply to certain mixtures, solutions and alternate names.
  • A limits Hazardous Materials Regulations applicability to material offered or intended for aircraft transport, unless it is a hazardous substance or hazardous waste.
  • W is the vessel counterpart of A, with the same hazardous-substance and hazardous-waste qualification.
  • D identifies an appropriate domestic name that may be inappropriate internationally. It is not a blanket prohibition on international transport.
  • I identifies a name appropriate internationally. An alternative name may be selected for domestic-only transport.
  • G requires one or more technical names in parentheses with the basic description, subject to §172.203(k).

An A or W entry may also be used for other modes when all applicable entry requirements are met. Don't treat either letter as a complete mode-eligibility decision.

How to choose the right shipping entry

Start with classification. Determine the material's hazard classification and packing group, where applicable, using Part 173 criteria. Then use the entry-selection rules in §172.101(c):

  1. Check for an appropriate specifically named entry. Apply the mixture or solution rules where relevant.
  2. If the appropriate technical name is absent, select the generic or n.o.s. description that most appropriately describes the material and matches its classification.
  3. Where several rows share a name, use the row matching the determined packing group and hazards.
  4. Check whether a G symbol requires technical names. A trade name alone does not resolve that requirement.

The abbreviation n.o.s. means "not otherwise specified." The regulation prefers "Alcohol, n.o.s." over "Flammable liquid, n.o.s." for an unlisted alcohol. An application name can also be more appropriate than an n.o.s. entry.

Not all materials have a packing group. Class 2, Class 7 and Division 6.2 have none, and articles in classes other than Class 1 are not assigned packing groups. A missing packing group does not remove packaging obligations under §172.101.

For unnamed materials with multiple hazards, follow the reference in §172.101 to §173.2a's hazard-precedence rules. Don't select a row because its packaging provisions look easier.

Carry the row into shipment documents and packages

Shipping papers do not follow the table's left-to-right order. The basic description starts with the identification number, followed by proper shipping name, hazard class or division and packing group when required. Required subsidiary hazards follow the primary hazard in parentheses. Technical names have their own placement rules. Total quantity and package number or type are additional requirements, not items to insert into that basic sequence. See §172.202.

For non-bulk packages, §172.301 generally requires the proper shipping name and identification number. Add technical names where required, plus consignor or consignee details, subject to exceptions. This section does not cover every marking requirement for every packaging type.

Use Column 6 with the applicable labeling rules in §172.400. Column 6 is not a vehicle placarding instruction. The placarding Table 1 and Table 2 are separate tables in §172.504. Table 1 generally requires placards for any quantity, with exceptions. Table 2's highway/rail small-load exception is not a universal exemption.

Hazardous materials table Appendix A and the December 2026 change

In the eCFR text current through November 5, 2026, Appendix A to §172.101 contains hazardous substances and reportable quantities. An RQ is not a maximum permitted shipping quantity. The hazardous-substance definition also requires attention to quantity in one package and mixture or concentration rules.

A PHMSA final rule takes effect December 2, 2026. It replaces Appendix A's duplicate Tables 1 and 2 with a direct reference to EPA's list and RQs in 40 CFR 302.4, including its radionuclide appendix. Those appendix tables are not the placarding tables in §172.504. It does not remove the Hazardous Materials Table.

Appendix B lists marine pollutants. Listing alone does not make a substance Class 9 for all modes. Check the applicable marine-pollutant rules.

RegAffairs AI's answer on reading the hazardous materials table includes citations to the regulatory data.

Related guides