Pesticide tolerances and how to check US food residue limits
Pesticide tolerances set US food residue limits. Check 40 CFR Part 180 for the pesticide, commodity, residue definition, exemptions and conditions.
Pesticide tolerances are EPA's limits on pesticide residues allowed to remain in or on food. Find the US limit in 40 CFR Part 180, then check the commodity, residue definition and conditions before using the number.
EPA notes that some countries call these limits maximum residue limits, or MRLs. A search for a US MRL or an EPA MRL is still a search for that US tolerance. A foreign MRL does not establish the US requirement, so start with the US entry rather than a supplier's overseas residue table.
How EPA sets pesticide tolerances
EPA reviews toxicity and exposure data before setting a tolerance. EPA tolerance levels for pesticides are the residue levels that trigger enforcement actions. The number is a legal food-residue threshold, not an application rate. Exceeding it does not, by itself, prove poisoning. See EPA's tolerance-setting explanation.
The official 2024 edition of 21 USC 346a defines safe as a reasonable certainty that no harm will result from aggregate exposure. EPA's Food Quality Protection Act summary lists the sources in that assessment: food, water, residential and other non-occupational sources. Separately, EPA considers cumulative exposure to pesticides with a common mechanism of toxicity. The same summary describes an additional tenfold safety factor to protect infants and children, unless adequate data support a different factor.
How to look up EPA pesticide tolerances
Identify the ingredient and commodity
Write down the pesticide ingredient and the precise food or feed commodity. A commercial product name, or an everyday crop name, is not enough. Use EPA's Food and Feed Commodity Vocabulary to find the regulatory term.
EPA accepts only its preferred commodity term when establishing tolerances. The vocabulary also includes crop group names and numbers.
Find the pesticide in 40 CFR Part 180
Open 40 CFR Part 180 and find the ingredient's section in Subpart C, "Specific Tolerances." Note the displayed currency date before recording a result. The eCFR text used for this guide displayed currency through 5 November 2026.
Read the full section. A table row alone can leave out the residue definition or a restriction in the surrounding text. Check relevant amendments if your decision depends on a recent change.
Match the compliance residue to the laboratory result
Read what the section says must be measured. The parent pesticide is not always the compliance residue.
For example, the official flutriafol provision specifies measurement of flutriafol only. The bifenazate provision does not use one sum for every commodity. Some paragraphs require bifenazate plus one named metabolite. A different paragraph requires bifenazate plus three named metabolites. Each sum is calculated as bifenazate's stoichiometric equivalent. Neither example is permission to use the pesticide.
A ppm value alone does not identify the compliance residue. Before comparing a laboratory result with a tolerance, confirm which substances the laboratory measured. They must match the compliance residue definition.
Check individual commodities and crop groups
Search for the individual commodity and any applicable crop group or subgroup. A search for the crop's common name can miss a group entry.
Part 180 includes §180.40 on crop-group tolerances and §180.41 with crop-group tables. Consult those provisions to confirm membership and exclusions. Related-sounding crops are not automatic members of a group, and a broad group name is not proof of coverage.
A missing search result leaves the question open. Check group coverage and exemptions before concluding that no applicable provision exists.
Record the units and conditions
Part 180 defines ppm as parts per million. Record the figure with its units, exact commodity wording and any qualification in the applicable section.
Check the commodity form, limitations and any time-limited or expiration language. Keep these beside the number. A tolerance copied without its conditions is not a complete lookup result.
Exemptions and zero tolerances are different
Subpart D of Part 180 contains exemptions from the requirement for a tolerance. An exemption removes the numerical tolerance requirement within its scope and conditions. EPA reviews safety before granting one, as explained on its tolerance-setting page. It does not mean every use is approved or the substance has no hazard.
An expressly established zero tolerance for a pesticide has a different meaning. Section 180.5 says no amount may remain on the raw agricultural commodity when offered for shipment. A failed text search doesn't establish a zero tolerance. Check all applicable provisions before deciding that a residue has no lawful basis.
Does a Codex Alimentarius MRL satisfy the US requirement?
A Codex Alimentarius MRL does not automatically establish the US requirement. The official 2024 edition of 21 USC 346a says EPA must determine whether the Codex Alimentarius Commission has set a maximum residue level for the pesticide chemical, and if EPA does not propose to adopt that level it must publish a notice for public comment explaining the reasons for departing from it. That notice does not turn the Codex figure into the US tolerance.
For a US-bound food, use the applicable US provision. Keep a foreign-market comparison separate from that determination.
Keep the residue check separate from permission to apply
A tolerance does not, by itself, authorize use of a pesticide product. EPA describes registration as the license that permits sale and use according to EPA requirements. If the question is about application, check the product's registration and label separately from the food-residue requirement. EPA also says FDA tests food produced in the United States and imported food for compliance with these limits. State enforcement agencies check foods produced in this country, and USDA tests meat and milk. That's an overview of testing roles, not a commodity-by-commodity map. Keep a lookup record with:
- Pesticide ingredient and CFR section or paragraph.
- Exact commodity name and any applicable group.
- Compliance residue definition.
- Tolerance in ppm, or the applicable exemption.
- Qualifications, expiration language and relevant amendment.
- Source URL and displayed currency date.
RegAffairs AI's answer on finding US pesticide tolerances walks through the crop lookup and explains tolerance versus MRL terminology.